Tensioned Rubber Screens
An all-round rubber panel designed primarily for final products of 4-100 mm and is made of wear-resistant rubber and features special heat-treated cord reinforcement that facilitates tensioning.
The reinforcement also reduces the degree of tensioning, which contributes to a longer service life. The rubber panels are fitted with tension hooks as standard. For screen widths in excess of 1200 mm, centre hold-downs should be used. These rubber panels are normally used in thicknesses of 5-35 mm.
Rubber Panel Systems
Is a self-supporting screening medium mainly for use in coarse and medium screening operations.
An integral steel and cord reinforcement is vulcanised within each panel. The punched apertures are available in a wide range. Aperture shape is designed to minimise the risk of pegging and maximise the throughput. The thickest panels also have rider bars on the upper surface to increase life in coarse applications.
All panels are tailor made to match machine size and operating conditions. A complete and wellproven attachment system simplifies both installation and further replacements. Particularly designed for around the clock operations, i.e. screens running with the same aperture size all the time and where minimum downtime and low cost per ton is crucial.
A proven favourite in mining applications!